This site has limited support for your browser. We recommend switching to Edge, Chrome, Safari, or Firefox.

Live Chat 9am - 9pm / Mon - Fri AEST
Free Shipping Over $79 Australia Wide
Buy Now Pay Later with Afterpay
Your Cart

How Does AfterPay Work?

Posted by Teralume Industries on

How AfterPay Works & How To Get Started AfterPay works on a simple strategy where member retailers offer customers the option to pay in instalments. The purchase amount is split into 4 manageable fortnightly instalments,...

Complete LED Driving Light Buyers Guide

Posted by Teralume Industries on

Your Complete Guide To LED Driving Lights By now, you would have heard about LED Driving Lights taking the market by storm. It can be hard to decipher exactly what to look for when making...

X-RGB Installation Instructions

Posted by Teralume Industries on

Please select your X-RGB Kit to view the installation instructions: X6 RGB Rock Lights - 6 Pack X8 RGB Rock Lights - 8 Pack  

How to Install X1 Work Lights

Posted by Teralume Industries on

In this article, we go through a full step by step guide for the X1 Work Lights.    Tool Requirements: 10-13mm socket or open/ring end spanners - Used for removing the battery terminal6x-10x cable ties...

How to install your X6 RGB Rock Light Kit

Posted by Teralume Industries on

In this article, we outlay the full step by step guide for the X6 Underlight RGB Camp Lights.    ATTENTION!! To ensure a correct connection, please make sure the arrows on the plugs line up....

How to fit your X8 RGB Rock Light Kit

Posted by Teralume Industries on

In this article, we outlay the full step by step guide for the X8 RGB Camp Lights.   ATTENTION!! To ensure a correct connection, please make sure the arrows on the plugs line up. If...

Jeep Wrangler JK LED Headlight Conversion - JScan App

Posted by Teralume Industries on

JScan Configuration for the Sight LED Headlights - JK Wrangler   In this article, we run through how to use the JScan App to configure your JK Wrangler for the Teralume Sight LED Headlight conversion.What's...

How To Fit Your Icon LED Driving Lights

Posted by Teralume Industries on

Installation Instructions for the Teralume Industries Icon LED Driving Lights Tool Requirement:2x 17mm socket or open/ring end spanners - Used for centre bolt and nut on the bracket.1x 13mm socket or open/ring end spanner -...

Sight 7 Inch Headlight - Installation Guide

Posted by Teralume Industries on

Sight Headlight Wiring and Fitting Guide If your vehicle doesn't require a CANbus module and is positively switched, please refer to the first diagram below.  Time Requirement: 30-40 Minutes. This will depend on your vehicle....

Lux vs. Lumens – The Great Debate!

Posted by Teralume Industries on

The Truth About Lux Vs Lumens – Auxiliary Vehicle LED Lighting LED Driving Lights and Light Bars vs. LUX – An accurate measurement, but more has to be considered. The short answer:Remember these 3 things when choosing...