Dual Cab Tray
Our Dual Cab Tray suits almost all modern day vehicles Mazda BT50, Ford Ranger and Toyota Hilux.
262kg Dry Weight
Dimensions: 1780L x 1850W x 850H
10-Year Structural Guarantee
From $9,990 + Professional Fitment
Space Cab Tray
Our Space Cab Tray suits almost all modern day vehicles like the Mazda BT50, Ford Ranger and Toyota Hilux.
308kg Dry Weight
Dimensions: 2080L x 1850W x 850H
10-Year Structural Guarantee
From $11,990 + Professional Fitment
American F150/1500 Tray
Our long awaited Tray for the American F150/1500 Dual Cabs has arrived!
312kg Dry Weight (Estimate)
Dimensions: 2100L x 2050W x 900H
10-Year Structural Guarantee
From $14,990 + Professional Fitment
American F250/2500 Tray
Our long awaited Tray for the American F250/2500 Dual Cabs has arrived!
332kg Dry Weight (Estimate)
Dimensions: 2300L x 2050W x 900H
10-Year Structural Guarantee
From $15,990 + Professional Fitment
Standard Features
• Built Tough With a 10 Year Structural Guarantee
• Brand New One-Piece Headboard Design
• Integrated Zone Lighting
• One-Piece 3mm Tray Floor
• Integrated Tie Down Points On Sides
• Lockable Pull-Out 1 Meter Trundle Drawer
• Lockable Under Tray Toolbox Drawers
• Integrated 100L Water Tank & Faucet
• Integrated Teralume Fuel Filler Design
• Twin Sequential LED Tail Lights
• 6mm Structural Frame
• Optional Tray Side Boards
1 Meter Trundle Drawer
By using the headboard for water storage, we have now the room for a full length lockable trundle drawer and table.
New Fuel Filler Design
Exclusively designed high flow fuel filler by Teralume Industries. We've seamlessly integrated our internally vented fuel filler which even allows high flow diesel pumps!
Integrated Zone Lighting
Recessed neatly in the back corner of your tray is integrated zone lighting. An industry first integrated lighting solution offers lighting at the touch of a button!
Lockable Side Doors
Side boxes allow convenient storage and a 'no spill' design so when you open your box, nothing falls out or is jammed in there.
Tray Side Boards Available
Tray side boards are available if you choose to switch between a typical ute or a canopy setup.
Integrated Water Tank
Our headboard and under tray water tank allows you to carry an extra 100L water on the go without it taking up valuable cargo space!
Camera and Sensor Relocation
At Teralume Industries, we ensure vehicle safety isn't compromised when upgrading with our trays or canopies. Our solution relocates essential safety features like reverse and 360 cameras, blind spot and cross-traffic monitors, and parking sensors. Our skilled fitment centres handle these adjustments precisely, giving you confidence on the road.
- PX1, 2 & 3 Ranger
- Next Gen Ranger / Raptor
- Volkswagen Amarok 2012+
- Volkswagen Amarok NF 2023+
- Isuzu Dmax
- Maxda BT50
- Toyota Hilux N80 & N70
- GWM Canon
- LDV T60
- Holden RG Colorado
- Mitsubishi Triton MR, MN & MV
- Nissan Navara D23 NP300
- Ssangyong Musso 2019+
A common reason for needing to relocate sensors is when installing an aftermarket tray or canopy on a vehicle that already has OE safety features installed. The sensors, such as reverse proximity parking sensors, blind spot monitors, cross-traffic monitors, and cameras, are typically located on the original tray or bumper of the vehicle, which is often removed when installing an aftermarket tray or canopy. Relocating the sensors allows the safety features to continue functioning as intended, ensuring the safety of the driver and other road users.
In most cases, the sensors cannot simply be bolted back up anywhere. The sensors are typically designed to work within specific parameters and have specific requirements for their location and orientation in order to function properly. If the sensors are not relocated correctly, they may not work as intended, or they may not work at all. This could result in a loss of functionality or even a potential safety hazard. Therefore, it's important to have the sensors relocated by a qualified professional who understands the requirements and can ensure that they are installed correctly.