Nissan Navara NP300
Engineered in Brendale for how you’ll work, tour and load your Navara NP300.
10Year
STRUCTURAL GUARANTEEStructure, mounting and fitment. Not twelve months and not just the paint.
See the details5.0
GOOGLE REVIEWSVerified reviews from touring, trade and fleet customers around the country.
See the details10Inclusions
INCLUDED AS STANDARDWater, storage, lighting and hardware are in the price, not quoted as extras.
See the details21Dealers
AUSTRALIA-WIDETrained, stocked and backed by us, wherever your build is fitted.
Find yoursTHREE WAYS TO BUILD IT
The body decides the payload, the access, the storage and the power. Choose it first and the rest follows.
For owners who still need an open deck, and the lightest XGO™ start.
BEST FITTowing, mixed work and open-deck loads
See the Ute Trays
The tray and the canopy as one welded body, for a build that stays set up.
BEST FITDedicated touring, remote travel and a long-term build
See the Chassis Mount Body
Enclosed storage now, and a canopy that comes off when the job changes.
BEST FITMixed use, where the vehicle’s role still changes
See the CanopiesNot a Navara? We fit the same three bodies to every vehicle on our list.
Which ute is yours?THE PAYLOAD
The Nissan Navara NP300, worked through for each XGO build.
LEFT FOR YOU AND YOUR GEAR
728kg
XGO BuildRemaining payload
Swap builds above to see what each one leaves you.
That build puts this platform over its GVM. We would spec you a lighter one, or talk to you about an engineered GVM upgrade, certified and plated. We would not sell you this and hope.
Indicative figures. GVM and kerb weight are the factory figures for one cab chassis version of the vehicle, before a tray or body goes on. Weights vary from vehicle to vehicle, so your compliance plate has the final word.
THE PLATFORM
Swipe for more
An NP300 is a cab chassis on leaf springs or a pickup on coils. We fit both, and weigh a pickup with its tub off.
CAMERAS AND SENSORS
Sensor and camera details depend on the vehicle.
DESIGNED, ENGINEERED, GUARANTEED
10 years means 10 years. From the day it’s fitted, the structure is backed by Teralume, whoever fitted it.
SKINNEDSTRUCTURAL FRAME
No short-term warranty dressed up as confidence. We engineered it, we built it and we stand behind it.
LITHIUM POWER
One wall-mounted hub keeps the canopy floor clear. Our in-house auto-electrical team sizes and fits it.
| PART | RATING |
|---|---|
| Lithium battery | 200 Ah or 300 Ah |
| Inverter | 3000 WPure sine |
| Vehicle charging | 40 ADCDC charger |
| Solar | 40 ASolar regulator |
| Mains charging | 40 AAC charger with RCD |
| Switching | 8 switchesPlus USB & Anderson outlets |
THE XGO RANGE
Engineered to the Navara, with water, lighting, locking and hardware in the price. Add the rest without drilling.
REAL BUILDS
Owners’ Navaras, fitted by us and by authorised dealers, then the full walkthrough of one build.
Every photograph is a customer’s vehicle, fitted by us or by an authorised dealer.
See the full galleryWHAT OWNERS SAY
I looked at a lot of different canopy manufacturers around Brisbane, but I keep coming back to Teralume. The team couldn’t have been more helpful; from spending time with me at the various 4x4 shows to walking me through the process. They worked hand in hand with Bremer Ford when it came to delivery logistics and nothing was too difficult to work through with me as I refined my requirements. I’m so happy with my Chassis Mounted Canopy on my Ranger Super Duty and am now looking forward to fitting it out with my touring setup. Absolutely would recommend Dan and the team at Teralume!
Kakadu RoseRanger Super Duty · Northern TerritoryAwesome product at a very fair price, recently drove 12 hours to have a canopy fitted to my Teralume tray, decided on a couple accessories to be fitted after I turned up and nothing was a hassle, good service, even better product, would recommend to anyone in a heartbeat.
Bradley OwenToyota LandCruiser 79 Series · Queensland
LandCruiser 79 Series1700 mm Chassis Mount · Google review
Ranger Next GenFull XGO touring package · Google review
Chevrolet Silverado 2500HDTray & Canopy · Google review
Ranger Super Duty1700 mm Chassis Mount · Google review
Toyota HiluxTray & Canopy · Google review
Isuzu D-MAXTray · Google review
Toyota HiluxTray & Canopy · Google review
AUTHORISED DEALER NETWORK
Every XGO build is fitted by an authorised dealer we have trained, stocked and backed. Find yours by postcode.
40 Griffin Crescent
116 Aumuller Street
28 Tolga Road
197-201 Maggiolo Drive
102-104 Elphinstone Street
17B Trinder Avenue
10/11 Matheson Street
4/9 Davo Court
2/4 Enterprise Crescent
Unit 2, 1 Templar Place
26 Alma Avenue
14 Orielton Road
31 Brown Road
4/218 Princes Highway
64 Kembla Street
148 Murphy Street
133 Northern Road
31 Orchard Crescent
34 Adelaide Road
29 Sturt Street
68 Cutler Road
Unit 8/29 Huntingdon Drive
No dealer nearby? We can still help. Send your vehicle and postcode through and our team will organise the best supply or fitment option for you.
21 authorised dealers, and we quote and organise fitment wherever you are. Further away? We can make the logistics work.QLD 8 · NSW 6 · VIC 2 · SA 2 · WA 1 · TAS 1 · ACT 1 · NZ 1
Fitting availability and lead times can vary by location.
STRAIGHT ANSWERS
Six questions Navara owners ask first, answered short.
It depends on the job. A tray keeps the deck open for loads that change. A tray and lift-off canopy gives you enclosed storage that can come off later. A chassis mount body is the most integrated: one structure, designed around touring and remote travel. Tell us how you work, tour and load the NP300 and we’ll spec the one that fits.
Both. The figures above are the cab chassis’s: the MY21 to MY24 SL 4x4 Dual Cab Chassis on leaf springs, with a 2,910 kg GVM. A pickup rides on coils with a 3,150 kg GVM, and it is fitted with the tub off and weighed before we quote.
Yes. It is around 100 kg lighter like for like, because the tray and the canopy become one structure. That weight goes back into what you carry, and the payload block above works it through build by build.
The reverse camera is relocated. Any sensors your NP300 has are planned into the build before a hole is drilled, the fuel filler is routed for the body you choose, and every function is confirmed working at handover.
Yes. The channel mounting system takes accessories without drilling, and the power hub is planned into the body from the start, so the next layer goes in cleanly whenever you are ready.
This page is for the NP300, the Navara of 2015 to 2025. The 2026 Navara is a new vehicle on the Mitsubishi Triton’s chassis, with its own figures. Tell us what you drive and we’ll tell you what fits.
IT’S TIME. LET’S CHAT
Give us the vehicle, the load and the trip. We’ll spec around it, and tell you honestly if you don’t need half of it.
5.0 · 50+ Google reviews · 10-year structural guarantee
