X-RGB Installation Instructions
Posted by Teralume Industries onPlease select your X-RGB Kit to view the installation instructions: X6 RGB Rock Lights - 6 Pack X8 RGB Rock Lights - 8 Pack
How to Install X1 Work Lights
Posted by Teralume Industries onIn this article, we go through a full step by step guide for the X1 Work Lights. Tool Requirements: 10-13mm socket or open/ring end spanners - Used for removing the battery terminal6x-10x cable ties...
How to install your X6 RGB Rock Light Kit
Posted by Teralume Industries onIn this article, we outlay the full step by step guide for the X6 Underlight RGB Camp Lights. ATTENTION!! To ensure a correct connection, please make sure the arrows on the plugs line up....
How to fit your X8 RGB Rock Light Kit
Posted by Teralume Industries onIn this article, we outlay the full step by step guide for the X8 RGB Camp Lights. ATTENTION!! To ensure a correct connection, please make sure the arrows on the plugs line up. If...
Jeep Wrangler JK LED Headlight Conversion - JScan App
Posted by Teralume Industries onJScan Configuration for the Sight LED Headlights - JK Wrangler In this article, we run through how to use the JScan App to configure your JK Wrangler for the Teralume Sight LED Headlight conversion.What's...
How To Fit Your Icon LED Driving Lights
Posted by Teralume Industries onInstallation Instructions for the Teralume Industries Icon LED Driving Lights Tool Requirement:2x 17mm socket or open/ring end spanners - Used for centre bolt and nut on the bracket.1x 13mm socket or open/ring end spanner -...
Sight 7 Inch Headlight - Installation Guide
Posted by Teralume Industries onSight Headlight Wiring and Fitting Guide If your vehicle doesn't require a CANbus module and is positively switched, please refer to the first diagram below. Time Requirement: 30-40 Minutes. This will depend on your vehicle....